主题 : 【新闻】NDS模拟器 No$gba v2.5b 发布
级别: 模拟之星
UID: 22304
精华: 1
发帖: 102
威望: 1 星
金钱: 152 浮游币
贡献值: 18 点
好评度: 238 点
人气: 0 点
在线时间: 327(时)
注册时间: 2005-04-16
最后登录: 2024-09-22
楼主  发表于: 2007-11-04 10:08

【新闻】NDS模拟器 No$gba v2.5b 发布

管理提醒: 本帖被 lzsgodmax 执行加亮操作(2007-11-04)
NDS模拟器 No$gba 发布新版,更新内容如下:

No$gba v2.5a debug version bugfix
No$gba v2.5b 3d frameskip, 3d vram viewer, wifi details


03 November 2007 - version 2.5b
- nds/3d/debug: vram viewer auto-updates 3d tree view (if any) during emulation
- nds/3d/debug: defaults to disable old/slow 3d debugmsg's (instead vram viewer)
- nds/3d/mtx: removed v2.5 z-rounding trick, allows to change projection per vtx
- nds/3d/mtx: gl_projection set to identity (but max depth +1.0 instead +0.99)
- nds/3d/mtx: all matrix math done by software without using any opengl matrices
- nds/spi: allows to deselect/disable spi bus without clearing the hold-bit
- nds/3d/debug: vram viewer displays texture bitmap for currently selected vtx
- nds/3d/debug: vram viewer draws laser arrow from screen-center to selected vtx
- nds/3d/debug: vram viewer indicates unused lights and color tables by red line
- nds/3d/debug: vram viewer shows color/material/shininess/etc for selected vtx
- nds/wifi/help: added port 24Ch/24Eh/250h, 264h/270h, 2A4h/2C4h, 2C8h/2CCh info
- nds/3d/speedup/frameskip: renders 3d only when needed (capture and video out)
- nds/3d/speedup: position vectors multiply only 3x4 matrix (and add 1x4 * w=1)
- nds/3d/speedup: directional vectors use 3x3 matrix maths (instead slow 4x4)
- nds/key1/help: renamed crypt_up/down (actually encrypt/decrypt) (thanks simon)
- nds/3d/stage2/buf: all 3d rendering/lighting/vtxmaths performed from buffer
- nds/3d/multi: uses a single opengl context shared (and working) for multiplay
- nds/3d/internal: internally translates gx commands 0..255 to ID codes 0..38
- nds/wifi/help: added W_TX_HDR_CNT port 194h bit0,1,2 info (thanks Tim Seidel)
- nds/3d/debug: added new 3d page to vram viewer, treeview for buffered commands
- nds/3d/buf: stores initial frame settings, reallocs larger buffer when needed
- nds/3d/buf: stores commands with original params, and results on each mtx cmd
- nds/3d/buf: buffers all gx commands (for future frameskip and for vram viewer)
- nds/3d/deguglog: appends current matrix_mode as comment to all matrix commands
- nds/3d/softlight: fixed shininess_table index (7bit index = 8bit data div 2)
- nds/wifi: emulates 0000h-to-094h-to-098h, and reset-098h.bit15-via-0B4h.Bit6
- nds/wifi/help: added 1D0h..1DFh info, added notes on body[2] instead txhdr[2]
- nds/wifi/help: confirmed 0B4h.Bit6, added 030h.Bit7, added info on 094h/098h
- nds/wifi/help: removed incorrect/unconfirmed rxbuf_begin/end-latching-info
- nds/wifi/help: added txhdr[2], port[0C0h], port[0C4h], renamed EXTRA to CMD
- nds/wifi/help: renamed W_RXUNITS to W_RXTX_ADDR and moved it to status chapter
- nds/wifi/help: added notes on registers affected by powerforce (and by irq13)
- nds/wifi: reflects powerforce to rf_status (unreported pictochat-lite problem)
- cpu/debug: replaced invalid tmb high-opcode error message by optional warning
- cpu/debug: disassembler shows invalid high-opcodes as such (thanks vladimir)
- cpu: emulates invalid add/mov/cmp thumb high-opcodes-without-high-registers
- joysticks: fixed unstable vint_inputs code (occassionallly skipped joysticks)
- nds/wifi/dslite: debug-iomap recognizes channel-number for type3 RF registers
- nds/wifi/dslite: emulates type3 RF registers (reading, writing, and initial)
- nds/wifi: emulates reading from RF chip, emulates initial power-on RF values
- nds/wifi/help: added RF2958 (aka RF9008) datasheet info (thanks Tim Seidel)

下载请至作者首页

http://nocash.emubase.de/gba.htm
级别: 模拟小生
UID: 214971
精华: 0
发帖: 77
威望: 0 星
金钱: 2989 浮游币
贡献值: 0 点
好评度: 217 点
人气: 0 点
在线时间: 77(时)
注册时间: 2007-05-24
最后登录: 2012-01-26
沙发  发表于: 2007-11-04 15:03

看來nds模擬器完美已經不是問題了..............
no$gba開始統一天下啦